Application Method

 

The coating agent has a capacity of 30mL and can form up to 570 drops.

 

The ambient temperature for application is recommended to be 15°C to +30°C. The ambient temperature will affect the drying speed of the coating agent. Please use a small area to test the drying speed of the agent before actual application to ensure that it will not cause application issues during usage.

 

    •       Fix the attached microfiber cloth on the coated sponge and put 10-15 drops on it.

    •       Apply quickly and evenly on the surface until a thin film can be seen, and the

             applied area is 60cm x 60cm (not larger than this area)

    •       Gently apply a thin layer on the paint surface evenly in a crisscross pattern 2~3 

             times.

    •       Let the coating stand for 3~10 minutes (the drying speed is different for different

             ambient temperatures, the actual time is judged according to situation.) On the basis

             that the coating can be removed if not completely dry, fold the attached microfiber

             towel and wipe gently to remove the film, do so lightly and with no force, as too

             much force will reduce the efficacy of the agent that should be attached to the

             surface.Wipe until there is no longer any visible residue and the color is even. (It is

             recommended to use a yellow and white light source to inspect the surface to ensure

             the integrity of the quality of the film.)

 

 

Drying / curing conditions : 

 

Surface drying time :    8hrs. (May come into contact with water / may not wash the car),

                                 Before 8hrs cant contact with water

 

Curing time :               24hrs. (May come into contact with water / rinse / may not wash the

                                 car, bird droppings should be removed immediately when it comes into

                                 contact with the paint surface, leaving for too long will cause decline

                                 in base performance of the coating)

 

Fully cured :                7~10 days (May come into contact with water / may not wash the                                       car)

 

Chemical resistance :   The fully functional film is present for at least 2 weeks, during which

                                 time the coating surface should not be subject to any form of friction

                                 (such as from car washing).

 

​

​